Articles
Categories
Latest comments
-
-
-
Setting up an Orange Pi 3 LTS with EKOS/INDI/KStarsHi Tracy, total Linux newbie here but I was proficient in DOS back in the day. I just received my Orange Pi 3 LTS a few days ago and I'm going to...
- freddylq
-
Attaching the ZWO EAF to an Apertura 72mm APO refractorI'm glad you got some use out of it... it drove me batty until I figured it out.
- Tracy
-
Attaching the ZWO EAF to an Apertura 72mm APO refractorThank You! I couldn't figure out how to get the knob off. With your instructions, I was done in under 10 minutes. Now to calibrate!- StarNut
-
Hardware Attaching the ZWO EAF to an Apertura 72mm APO refractor
This guide will help walk you through installing a ZWO EAF on the 72mm Apertura refactor telescope (APT-72EDR, and most likely the 60mm little brother of it) that is sold by High Point Scientific. This telescope is the same as offered by other vendors, simply rebadged. So the process should be...- Tracy Perry
- 2 min read
- Views: 473
- Comments: 2
-
Hardware BeeLink U59 (W11 N5105 Jasper) StellarMate X OS install
I recently purchased this after obtaining an Intel NUC 11 and having good luck with it running StellarMate X OS. The thing that I found attractive about this unit was it also allowed me to install a 2.5" SSD in it in addition to the 500GB storage. I placed a 1TB Samsung 980 SSD into the system... -
Hardware Setting up an Orange Pi 3 LTS with EKOS/INDI/KStars
The OrangePI 3 LTS used in this article is the 2GB version. When you get your Orange Pi 3 LTS, I'd recommend using an Ubuntu image instead of the Debian. I spent 8 hours trying to get the Debian image that was available at the time my Orange Pi can in to work with tightVNC, and never could...- Tracy Perry
- Updated:
- 9 min read
- Views: 1K
- Comments: 1
-
General Info Some beginners basics of astrophotography that I have learned for my equipment
This article/guide is a work in progress. I'll be adding to it as time goes along and I pick up more useful information.. I will try to detail, in various pages of this article, some of the issues that cropped up for me as a beginner, and some of the terminology that was somewhat confusing to...
