• The resources here are provided as a courtesty.
    Guest, Astro What? offers no guarantee as to the usability or reliability of any of the resources found here.
ZWO EAF mounting bracket for William Optics RedCat 51 V2.5

Free ZWO EAF mounting bracket for William Optics RedCat 51 V2.5 2024-01-10

No permission to download
Simple system to use the ZWO EAF together with a William Optics RedCat 51. Very precise and space-saving thanks to the installation under the telescope and the control via belt.

It is recommended to print with a strong material such as PETG CF, Extrudr GreenTec Pro, PA12CF/GF or similar.

  • 3 perimeters (2 perimeters for the belt ring)
  • 0.2mm layer height
  • 20% gyroid filling
  • No supports required
Required mounting material:

  • Timing belt: 6mm GT2-308
  • GT2 belt pulley 16 teeth 5mm center bore
  • 2x M6*40mm
  • 1x M6*14mm + 1*M6 nut in flat (3mm thick)
  • 2x rectangular nut M3
  • 2x M3*10mm
The model is tested on a RedCat 51 V2.5, I can't guarantee the accuracy of fit on older versions!
  1. Yes

Submitted by
First release
Last update
0.00 star(s) 0 ratings

More resources from Tracy